12.Attach the Latch Housing (48) to the Left start Upright (53) with two Latch Screws (10); both Latch Screws before tightening them. Make sure that the large hole in the Latch Housing is on the indicated side.
Remove the knob from the pin. Make sure that the collar and the spring are on the pin. (Note: If there are two collars, place one on each side of the spring.) Insert the pin into the Latch Housing (48). Then, tighten the knob onto the pin.
12 |
|
| |
Knob | 48 | 53 | |
Spring | |||
10 | |||
| Collar | ||
| Large Hole | Pin |
13.Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys in a secure place. The large hex key is used to adjust the walking belt (see page 20). To protect the floor or carpet, place a mat under the treadmill.
11
