Weslo WETL26805.1 user manual Crossbar Screws yet

Models: WETL26805.1

1 24
Download 24 pages 58.53 Kb
Page 8
Image 8

6.Carefully pull the opposite end of the tape to pull the Wire Harness (60) up through the Right Handrail (59) and out of the hole in the side of the Right Handrail.

Remove the tape from the Wire Harness (60).

7.Orient the Crossbar (91) with the large hole at the right of the smaller hole as shown. Set the Crossbar against the Handrails (53, 59) with the brackets on the Crossbar aligned with the two small holes in each Handrail. Attach the Crossbar with two Crossbar Star Washers (93) and two Crossbar Screws (92). Do not tighten the

Crossbar Screws yet.

With the help of as second person, hold the console assembly near the Crossbar (91). Connect the pulse wire from the Crossbar to the pulse wire from the con- sole assembly. The connectors should slide easily into each other and snap into place. If they do not slide easi- ly and snap into place, turn a connector and then insert it.

Insert the ground wire through the two plastic ties shown in step 8. Attach the end of the ground wire to the small hole in the side of the Right Handrail (59) with a Silver Ground Screw (69).

8.Place the Console Base (52) on the Crossbar (91), Right Handrail (59) and the Left Handrail (not shown). Be care- ful not to pinch any wires. Attach the Console Base with four 3/4” Screws (2) (only two Screws are shown). Do not overtighten the Screws.

Insert the Wire Harness (60) through the two indicated plastic ties on the Console Base (52). Next, touch the Right Handrail (59) to discharge any static. See the inset drawing. Insert the connector on the end of the Wire Harness into the red socket beneath the console. The connector should slide easily into the socket and snap into place. If the connector does not slide easily and snap into place, turn the connector and then insert it.

Make sure that the connector and wire appear as shown in the inset drawing. IF THE CONNECTORS ARE NOT

INSERTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON.

6

60

Tape

 

 

 

59

 

7

 

 

 

 

 

 

 

 

Console

 

 

 

 

Assembly

53

 

 

 

Ground

 

 

 

 

 

 

 

69

Wire

 

 

 

 

93

91

 

 

 

92

Pulse

 

 

 

 

Wires

 

 

 

 

 

59

 

93

 

 

 

 

 

 

 

 

92

8

52

 

 

 

 

60

 

 

 

 

Ties

 

91

 

 

 

 

 

2

 

 

 

 

59

 

60

 

 

 

 

 

 

Socket

8

Page 8
Image 8
Weslo WETL26805.1 user manual Crossbar Screws yet