Weslo WLEX09010 user manual HOW to Operate the Console, Scan mode

Mode Indicators

HOW TO OPERATE THE CONSOLE

Note: If there is a piece of clear plastic on the face of the console, remove it before operating the console.

1.To turn on the power, press the mode button or sim- ply begin pedaling. When the power is turned on, the entire display will appear for two seconds. The console will then be ready for operation.

2.Select one of the five modes:

Scan mode—

When the power

is turned on, the scan mode will automatically be selected. One

mode indicator will show that

the scan mode is selected, and

a second mode indicator will show which mode is currently displayed. Note: If a different mode is selected, you can select the scan mode again by repeatedly pressing the mode button.

Time, speed, distance, or

calories mode—To select one of these modes for

continuous dis- play, press the mode button

repeatedly. The mode indicators will show which mode is selected. Make sure that the scan mode is not selected.

3.To reset the display, hold down the mode button for two seconds. After the display is reset, the scan mode will be selected.

4.To turn off the power, simply wait for about four min- utes. Note: The console has an “auto-off” fea- ture. If the pedals are not moved and the mode button is not pressed for four minutes, the power will turn off automatically in order to con- serve the batteries.

7