Console Diagram
Thermostat
On/Off Button
USING THE CONSOLE
Refer to the console diagram above. The function of each console control is explained below:
Air Control: Determines the amount of air that is in the spa jet system during operation. If the control is turned to the left, the amount of air flowing through the jets will increase. If the control is turned to the right, the amount will decrease.
On/Off Button: Turns the spa on and off. When you first press the on/off button, the spa jet unit will run at low speed, providing gentle hydrotherapy. Press the button again and the spa will run at high speed, pro- viding more intense hydrotherapy. Press the button a third time, and the spa will shut off.
Air Control
The spa also features an automatic mode which heats and filters the water when the spa is left unattended. When the spa is first plugged in, or if the buttons on the console have not been used for longer than twen- ty minutes, the automatic mode will begin filtering or heating the water, as needed. Note: To keep the fil- ter and heat cycles from running, the power cord must be unplugged.
Thermostat: Controls the temperature of the water. The water heats at about 1.8¡F an hour with the cover on. The thermostat can be set to heat the water from 70¡F to 104¡F. You should use a medical or other accurate thermometer to check the temperature of the water.
12
