3.Turn off the console.
To turn off the console, simple wait for a few min- utes. If the walking belt is not moved and the con- sole button is not pressed for a few minutes, the console will turn off automatically.
HOW TO FOLD THE TREADMILL FOR STORAGE
When the treadmill is not in use, it can be folded to the compact storage position. CAUTION: You must be able to safely lift 25 pounds (11 kg) to raise, lower, or move the treadmill.
1.See drawing 1a below. Remove the frame pin. See drawing 1b. Hold the treadmill frame with both hands. CAUTION: To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the frame, make sure to lift with your legs rather than your back. Raise the frame to the vertical position.
1a |
| 1b |
| Frame Pin | Frame |
|
|
2. Using your right | 2 |
|
hand, pull the |
| |
|
| |
latch knob to the |
|
|
right and hold it. |
| Hole |
Raise the frame |
| |
|
| |
until the hole in |
|
|
the frame is |
|
|
aligned with the |
| Knob |
latch pin. Then, |
| |
Frame |
| |
slowly release the |
| |
|
| |
latch knob. Make |
|
|
sure that the |
|
|
latch pin is fully inserted into the hole. |
| |
3. Insert the frame | 3 | Right | |
pin through the | |||
| |||
| Upright | ||
lower end of the |
| ||
|
| ||
right upright into |
|
| |
the hole in the |
|
| |
frame. To protect |
|
| |
the floor or carpet |
|
| |
from damage, |
|
| |
place a mat under |
| Frame Pin | |
the treadmill. |
| ||
Keep the tread- |
|
| |
mill out of direct |
|
|
sunlight. Do not leave the treadmill in the stor- age position in temperatures above 85° Fahrenheit.
HOW TO MOVE THE TREADMILL
Convert the treadmill to the storage position as described on this page.
1.Hold the handrails and place one foot against one of the wheels.
2.Tilt the treadmill back until it rolls freely on the wheels. Carefully move the treadmill to the desired location. To reduce the risk of injury, use extreme caution while moving the treadmill. Do not move the treadmill over an uneven surface.
3.Place one foot against a wheel and carefully lower the treadmill.
HOW TO LOWER THE TREADMILL FOR USE
1.See drawing 3 above. Remove the frame pin.
2.See drawing 2 at the left. Hold the upper end of the frame with your left hand. Pull the latch knob to the right and hold it. Pivot the frame down until it is past the latch pin.
Carefully lower the frame to the floor. CAUTION:
To decrease the possibility of injury, bend your legs and keep your back straight.
3.See drawing 3 above. Insert the frame pin through the right upright into the hole in the frame.
9
