DIAGRAM OF THE CONSOLE
Monitor Display
Water Bottle
Speed Control Holder
(Water bottle
is not included)
Key
Clip
CAUTION: Before operating the console, read the following precautions.
¥Do not stand on the walking belt when turning on the power.
¥Always wear the clip (see the drawing above) while operating the treadmill. When the key is removed from the console, the walking belt will stop.
¥Adjust the speed in small increments.
¥To reduce the possibility of electric shock, keep the console dry. Avoid spilling liquids on the console and use only a sealable water bottle.
STEP BY STEP CONSOLE OPERATION |
| Insert the key fully into the power switch. |
1 |
Before the console can be operated, two ÒAAÓ batteries must be installed (see assembly step 6 on page 6). Follow the steps below to operate the console.
Step onto the grip tape on the treadmill. Find the clip attached to the key (see the drawing above), and slide the clip onto the waistband of your clothing.
Follow the steps at the right and on page 9 to operate the console.
Note: Inserting the key will not turn on the dis- play. The display will
turn on when the ON/RESET button is
pressed or when the
walking belt is started. (If you just installed
batteries, the display will already be on.)
8
