Weslo WLTL19306.0 user manual Assembly requires the included hex key, Wrench Wire cutters

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Do not remove the long wire is inside the Right Handrail until told to. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping car- ton. This does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex key		and your own phillips screwdriver	, adjustable
wrench	, and wire cutters	.

Note: To identify small parts used during assembly, see the PART IDENTIFICATION CHART in the center of this manual. Some parts may be preassembled. To avoid damaging plastic parts, do not use power tools for assembly.

1.Attach the six Base Pads (19) to the bottom of the Base (71) with six Base Pad Screws (42). Note: The Base

Pads may be preassembled.

•Hazardous Voltage •Risk of Electric Shock

•Unplug Treadmill before Assembly /Disassembly.

2.Have a second person hold the Base (71) in the position shown.

Identify the Right Handrail (6) which has a large hole near the lower end.

Hold the Right Handrail (6) so that the bend is in the position shown. Insert two Handrail Bolts (12) into the bracket on the Right Handrail. Attach the Right Handrail to the Base (71) with the Handrail Bolts, two Handrail Washers (30) and two Nuts (17). Do not tighten the

Nuts yet.

Attach the Left Handrail (7) to the Base (71) in the same way.

1	71
		42
42		19	42
19
			19
42
19	42
	19
2
30		17
12			30
		Large	17
			12
		Hole
7			30
	6
		71
Bend

6