USING YOUR BLENDER
1.Place appliance on dry, level,
2.Plug cord into a 120 volt AC electric outlet only.
3.Put liquids into the blender first unless recipes call for an alternate processing sequence.
4.Prepare ingredients for blending. Cut all solid ingredients, i.e. fruits, vegetables, or cheeses or meats into uniform pieces, ½ to
5.Blend foods according to the recipe or until the desired results are achieved. NOTE: If scraping or stirring of contents is required, turn blender to the “off” position and unplug from electrical outlet. Do not use metal utensils to stir as scratching of mixing jar may occur.
•A small amount of odor may occur during operation due to the release of manufacturing oils – this is normal.
Crushing Ice
1.Fill mixing jar with approximately
2.Cover the mixing jar with the lid and insert the lid cap.
3.When crushing ice, hold blender stable with the palm of your hand over the complete lid. Turn speed control to PULSE for 1 second and release. Pause for approximately
4.Drain off any excess water.
HINT: approximately 12 cubes
CLEANING YOUR BLENDER
1.Switch blender to “OFF” position and unplug from electrical outlet
2.Wipe motor base, control knob, and cord with a damp cloth or sponge. To remove stubborn spots, use a mild,
3.To clean mixing jar, disassemble all parts. Carefully wash all parts accept for motor base in warm soapy water, rinse and dry thoroughly. All parts except for motor base can be washed in the top rack of dishwasher.
4.Store blender with lid off to prevent mixing jar odor.
6