4.8 SOUND Settings

 

4 Operating Notes

 

 

 

 

 

 

IVA PRO LOGIC: The Dolby Surround Pro Logic decoder, in conjunction with the IVA processor, sim-

 

 

 

 

 

ulates five loudspeaker channels (front left, center, right and rear left and right) for surround sound in

 

 

 

 

 

the headphones. This channel configuration will not change.

 

 

 

 

 

We recommend this mode for movies and Dolby Surround recordings.

 

 

 

 

 

PRO LOGIC and IVA are lit.

 

 

 

 

IVA LOGIC7: The LOGIC7 decoder is on and constantly monitors the input signal. Depending on the

 

 

 

 

 

input signal format, the decoder will generate the required number of audio signals. The IVA proces-

 

 

 

 

 

sor will simulate the corresponding number of loudspeakers (up to eight for LOGIC7 input signals).

 

 

 

 

 

LOGIC7 and IVA are lit.

 

 

 

 

IVA STEREO: The IVA processor converts the stereo input signal to a binaural signal. The ear match-

 

 

 

 

 

ing function provides a natural sonic perspective with no inside localization.

 

 

 

 

 

We recommend this mode for natural reproduction of stereo music and speech signals.

 

 

 

 

 

IVA and STEREO are lit.

 

 

 

 

STEREO: The Pro Logic decoder, the LOGIC7 decoder, and the IVA processor are deactivated and

 

 

 

 

 

you will hear the unchanged stereo input signal in the headphones.

 

 

 

 

 

STEREO is lit.

 

 

 

 

 

 

Note:

 

Every time you press the MODE key (9), the required data will be loaded into the transmitter's RAM

 

memory. This takes about 2 seconds. During this time the audio signal is muted.

 

 

 

 

 

 

 

To select the desired SOUND setting NORM, MOVIE, or MUSIC, press the SOUND/CARD key (11)

4.8 SOUND Settings

 

once or several times. The related label (NORM, MOVIE, or MUSIC) will be lit.

 

 

 

 

 

 

 

 

 

 

 

Every time you press the SOUND key (11), the required data will be loaded into the transmitter's RAM

Note:

 

memory. This takes about 2 seconds. During this time the audio signal is muted.

 

 

 

 

 

 

The HEARO 888 DIGITAL Card is a chip card the size of a credit card. It allows you to adjust the sound

4.9 HEARO 888 DIGITAL Card

of your headphone system optimally to your sense of auditory perception. This will make the sound even

(optional)

more open and natural than it is with the internal settings.

 

 

 

 

You can order your HEARO 888 DIGITAL Card directly from AKG Vienna.

 

 

 

 

At www.akg.com/hearocard, you will find a number of ear matching curves from which you can select the

 

 

 

 

one where the test signals sounds most natural to you.

 

 

 

 

When ordering your HEARO 888 DIGITAL Card, state the number of the ear matching curve you select-

 

 

 

 

ed. The related coefficients are stored on a chip card that will be mailed to you.

 

 

 

 

1.

Place the card in the card well on the transmitter bottom panel with the golden memory chip on the

Refer to fig. 11.

 

card facing the transmitter.

 

 

 

 

2.Push the card into the card slot in the direction of the arrow to the stop.

3.Press and hold the SOUND/CARD key (11) until the CARD label is lit.

All sound presets (NORM, MOVIE, and MUSIC) will be modified by the coefficients of your ear match- ing curve.

4.To revert to the unmodified internal sound presets, press and hold the SOUND/CARD key (11) until the CARD label goes dark.

5.By holding the SOUND/CARD key (11) you can compare each internal sound preset with the version modified by your personal ear matching curve.

6.To remove the card, slide the card against the direction of the arrow to the stop. The card will drop out of the card well.

1. Rotate the ear pad on each earphone approximately 10° CCW to unlock the bayonet mount and 4.10 Replacing Ear Pads remove the ear pad.

2.Place one velour ear pad on each earphone and rotate the ear pad approximately 10° CW to the point that you can feel it has locked.

5 Cleaning 4.9 HEARO 888 DIGITAL Card5 Cleaning

1.Disconnect the AC adapter from the power outlet.

2.Use a cloth moistened (not wet!) with water to clean the surfaces of the mixer.

Never use caustic or scouring cleaners or cleaning agents containing alcohol or solvents since Important! these may damage the enamel or plastic parts.

19

HEARO 888 DIGITAL

Page 19
Image 19
AKG Acoustics specifications Cleaning, Operating Notes, SOUND Settings, HEARO 888 DIGITAL Card