West Bend L5572D, 88533 instruction manual Save These Instructions, Quick Release Heat Control

To prevent personal injury or property damage, read and follow all instructions and warnings.

•Longer, detachable power-supply cords or extension cords are available and may be used if care is exercised in their use. While use of an extension cord is not recommended, if you must use one, the marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance. If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord. The cord should be arranged so that it will not hang over the counter top or tabletop where it can be pulled by children or tripped over.

•Do not attempt to repair this appliance yourself.

SAVE THESE INSTRUCTIONS

QUICK RELEASE™ HEAT CONTROL

The Quick Release™ Heat Control is designed to release from the Fondue Pot easier than a standard heat control. This design meets Underwriter’s Laboratories (UL) current safety standards. To position the Quick Release™ control in place, make sure it is set to the “OFF” setting and place into the connection area under the handle. The magnet will draw the control in place and you will hear it click when it is connected (see below). Plug the cord into an electrical outlet. When finished using the Fondue Pot, set the heat control to the “OFF” setting, unplug the cord from the electrical outlet and allow to cool. If the heat control is removed while the Fondue Pot is still hot, use caution as portions of the heat control may be hot. If the heat control is pulled off during use, immediately unplug the cord from the wall outlet. Use caution when reconnecting the heat control as portions of it may be hot. Never move the Fondue Pot with the heat control attached as it can fall off and be damaged.

4