CLEANING YOUR JUICE EXTRACTOR
Use caution when cleaning the filter bowl with the juicer blade assembled. Wipe exterior with a damp cloth, and only rinse the interior. Disassemble and clean following the instructions below.
1.Switch motor base to “0” (OFF) and unplug from the electrical outlet.
2.Disassemble the juicer. Note: The filter bowl may have liquid remaining in the bottom. With the juicer outlet spout in the closed position, carefully remove the filter bowl and juicer blade. Empty liquid contents and juicer blade into the sink. CAUTION: There are many small, sharp blades on the juicer blade. To reduce the risk of injury, use extreme care when removing and handling the juicer blade.
3.Wash all loose parts, except the motor base in warm, soapy water, rinse thoroughly and dry. All parts except the motor base can be washed in the top rack of the dishwasher. The motor base can be wiped clean with a damp cloth. CAUTION: Never put the motor base in water or other liquid as damage will occur.
4.Pay particular attention to properly cleaning the juicer blade which is constructed of a very fine, filter mesh that must be clean and open for proper operation and juicing extraction. If necessary, clean the inside of the juicer blade with a nylon brush. Do not use a metal brush. Hold the juicer blade up to the light to ensure the mesh is clean and open. CAUTION: To reduce the risk of injury, do not use the appliance if the juicer blade exhibits excessive wear or damage. Inspect the juicer blade after each cleaning.
Note: Some fruits and vegetables can stain the plastic parts. To reduce the chance of staining, rinse and clean all parts immediately after juicing. If staining occurs, soak parts in water containing 10% lemon juice. Never soak the parts in bleach or other harsh chemicals.
CLEANING YOUR BLENDER ATTACHMENT (if included)
1.Switch the motor base to “0” (OFF) and unplug from the electrical outlet.
2.Wipe the motor base, powers, and cord with a damp cloth or sponge. To remove stubborn spots, use a mild,
3.To clean the blending jar, disassemble all parts. Carefully wash all parts except the motor base in warm, soapy water, rinse and dry thoroughly. All parts except the motor base can be washed in the top rack of the dishwasher.
4.Store the blending jar with the lid off to prevent odor.
12
