030-300372 Rev. A 27 July 2003
Westell Dual Connect NAT Router with DMH Technology
User Guide
If you clicked on OK in the preceding screen, the following screen will be displayed. This screen shows that the
Router is being reset.
View the Connection Rate at the Connection Overview section in the following Home page. If this status reads No
DSL Connection, check the DSL physical connection, explained in section 5 (INSTALLING THE HARDWARE).
NOTE: If no DSL sync is established, the connect button will not be displayed. To determine if the DSL sync is
established, check the Router’s DSL LED. If the DSL LED is not solid green, you do not have a DSL link
established. Contact your ISP for details.
The screen below shows the connection rate with values that indicate a successful SYNC has been established. The
connection rate values represent the transmission speed of your DSL line. (The Router may take time to report the
values.) Click on the Connect button to establish a PPP session.