Apple Macintosh

An Ethernet card is built into iMac, G3 Power Mac, and G3 PowerBook computers. To activate this card and find out if it is available:

1Click the Apple icon, then Control Panels, then Extension Manager.

2Search for Apple Ethernet NB.

3Click Apple Ethernet NB to activate the built-in card.

4Restart.

5Your Ethernet card is available if it is not being used for another device. One way to check is to find the

Ethernet jack on your computer and find out if it is empty. The jack looks the same as the jack marked ETHERNET on the back of the Westell modem.

6If your card is set to 10Base-T (10 Megabits per second), you can install the Westell ADSL modem. (See the instructions under “Installation” in this guide.) If you are not sure, consult your computer documentation.

Product Assistance and General Inquiries

Product Return

For equipment return, contact:

Westell Customer Support

Phone: Toll Free - 1-630-375-4500

Fax: 1-630-375-4931

Address:

750 North Commons Drive

Aurora, Illinois 60504

Web Address (Westell’s Home Page): www.westell.com

NOTE: DO NOT return damaged merchandise to Westell until you have first obtained a Return Material Authorization from Westell. For return of material, contact your Westell Customer Support representative

Publication

ADSL Modem Installation Guide

PN 030-300108D

ADSL Modem

Model 36R515

Revised December, 2000

© 2000, Westell, Inc.

All rights reserved. Printed in USA.

Trademarks

WireSpeed™ is a trademark of Westell, Inc.

All other trademarks are owned by the respective companies

9

030-300108D

Page 9
Image 9
Westell Technologies 36R515 manual Product Assistance and General Inquiries, Apple Macintosh, Product Return