Mounting the ADSL Modem on a wall (Optional)

To mount the ADSL modem on a wall:

1Obtain two pan-head screws (one #8 and one #6) and two #4 – #8 wall anchors. (Not provided.)

2With the ADSL modem held up against the wall where it is to be mounted, mark the upper keyhole slot and screw location.

3Drill a 3/16” hole for the upper anchor and insert the anchor and larger (#8) screw until the face of the screw is approximately 3/16” from the wall.

4Test-fit the unit on the screw, and adjust the screw depth for a sliding fit.

5With a pencil, mark the opening in lower mounting tab. Remove the unit from the wall.

6Drill a 3/16” hole for the lower anchor and insert anchor. Hang the unit on the upper screw.

7Insert the smaller (#6) screw through the hole in the lower mounting tab.

8Tighten the lower screw lightly with a screwdriver. Do not overtighten.

5

030-300108D

Page 5
Image 5
Westell Technologies 36R515 manual Mounting the Adsl Modem on a wall Optional