Westell Technologies 36R566 3.3 Multiple User Setup

Installation/User Guide

Model # –WebShare

Part # – 030-300109 Rev C

Revision Date – 09/2000

2000 Westell, Inc. Printed in the USA

030-300109C

6. The Link LED should be solid green indicating that the CPE connection has been made.

7. During us e, a pulsing yellow Activity LED indicates that data is being transmitted and received on the

Ethernet interface.

8. Proceed to section 4 to configure the software.

Figure 1. WebShare Proxy Router Single User Setup Connections

3.3 Multiple User Setup

Refer to the wiring diagrams in Figure 2 and Figure 3.

1. Connect the power supply cord to the power connector on the side of the WebShare Proxy Router and

plug into a power receptacle.

2. Connect a standard RJ11 telephone cable from the LINE connector to the ADSL-equipped phone line.

3. Obtain a multi-port Ethernet Hub (available separately). Ensure that the hub includes enough Ethernet

ports to meet the requirements of the network.

4. Connect the straight 10BaseT cable (included with this package) to the jack labeled ETHERNET on the

side of the unit to the jack-designated uplink on the Ethernet Hub. With some Ethernet Hubs, a

crossover cable (available separately) may be required. Please see the documentation included with the

selected Ethernet hub.

5. Connect each additional PC to the Ethernet hub.

6. Turn the power switch ON.

LINE

ETHERNET

POWER