UnitDescription
2.2. Back Panel
As shown in Figure 2, the RPB+ back panel includes the
Figurefollowing2:Backitems:Panel
Switched AC Outlets (Plugs 1 - 5): For connection to up to five AC devices. Each outlet is capable of switching up to 15 Amps. The total for all five outlets must not exceed 15 Amps.
SetUp Switches (RATE): A bank of four DIP Switches which set the Control Port baud rate, select the Off Time duration, enable/disable the Password Option, and enable/disable the Read Only Mode.
RS232 (Control) Port: For connection to an external modem or local PC. The RPB+ accepts ASCII commands via the Control Port.
DEFAULT Button: Reads Rate Switch settings and sets parameters accordingly. This allows the user to change Rate Switch settings without
Power Cable (115 VAC Units)
Power Cable Receptacle (230 VAC Units)
Circuit Breaker: 15 Amps
Power Switch | Page3 |
