Western Telematic CAS-161A manual Connect Power Cable, Connect Data Cables

	Even,
3.1.2.2. Parity		(Sw8)
Parity can be set to			, Odd, None, or Space.
				Switch 8 (Bank 2)
		ParityOdd,None,MarkSpace		X	X
				1 (On)	0 (Off)

3.2. Connect Power Cable

1.Make certain the power switch is in the OFF position.

2.Attach one end of the power cable to the AC power connector on the CAS-161A. Attach the other end to a grounded wall outlet.

3.3. Connect Data Cables

Note: Check to make certain all data cables are compatible. Refer to the Appendix for a description of the interface.

1.Make certain the power switch is OFF.

2.Connect the data cables from the devices to be controlled to the ports labeled 1 - 16 on the master unit.

If your installation includes optional CAS-161A Add-On Modules, install the additional Modules as described in Appendix C, and then connect ports 17 - 64.

3.Connect the cable from your control device (PC, modem, etc.) to the MODEM connector on the CAS-161A.

3-4