10.3. Command Summary
Command Availability
Function Command Syntax Supervisor User
Exit Command Mode /X [Enter] XX
Help Menu /H [Enter] XX
Display Site ID /J [Enter] XX
Display Port Status /S[P] [Enter] XÊË XÊ
Display Port Diagnostics /SD [Enter] XÊXÊ
Display Network Status /SN[P] [Enter] XÌ
Display Port Parameters (Who) /W[P] [n] [Enter] XXÍ
Set System Parameters /F [Enter] X
Set Network Port Parameters /N [Enter] X
Set RS232 Port Parameters /P <x> [Enter] X
Copy RS232 Port Parameters /CP [Enter] X
Connect /C <x> [x] [Enter] XX
Î
Resident DisconnectÏ[Enter]+++[Enter] XX
Third Party DisconnectÐ/D[/Y] <x> [x] [Enter]
/D[/Y] * [Enter]
/D Nn [Enter]Ñ
X
Erase Buffer /E[/Y] <x> [x] [Enter]
/E[/Y] * [Enter]
X
Reset Network Port /T [Enter] X
Default & Test /I[/Y] [Enter] X
Save Parameters /U [Enter] X
Upgrade Firmware /UF [Enter] X
ÊSupervisor Mode displays parameters for all ports; User Mode only displays parameters
for ports allowed by the Port Password.
ËTo display Port Passwords, include the “P” Option. (Supervisor Only).
ÌFor the /SN command only, the "P" Option will display the passwords that were used to
login to the CMS Network Port.
ÍA port with "User" command capability can only view its own parameters. A User Port
cannot view parameters for other ports.
ÎA User Port cannot perform a Third Party Connect.
ÏResident Disconnect: Disconnects your resident port from another port. The disconnect
sequence can be redefined via the Port Configuration Menus.
ÐThird Party Disconnect: Disconnects two or more nonresident ports. Must be issued
from a third port with Supervisor command capability.
ÑDisconnects a TCP Port, where Nn is the desired CMS TCP Port.
10-3
CMS Series - Console Management Switches, User's Guide CommandReference Guide