RMM User’s Guide
Command | Function/Options | ||
&Fn | Loads a | ||
| factory configuration. | ||
|
| &F0 | Generic template |
| * | &F1 | Hardware flow control template |
|
| &F2 | Software flow control template |
&Gn | Sets Guard Tone. | ||
| * &G0 | No guard tone (U.S. and Canada) | |
|
| &G1 | 550 Hz guard tone (some European |
|
|
| countries), requires B0 setting. |
|
| &G2 | 1800 Hz guard tone (U.K.), requires |
|
|
| B0 setting. |
&Hn | Sets Transmit Data (TD) flow control | ||
|
| &H0 | Flow control disabled |
| * | &H1 | Hardware flow control, Clear to |
|
|
| Send (CTS) |
|
| &H2 | Software flow control, XON/XOFF |
|
| &H3 | Hardware and software control |
&In | Sets Receive Data (RD) software flow control | ||
| (see also &Rn). | ||
| * | &I0 | Software flow control disabled |
|
| &I1 | XON/XOFF signals to your modem and |
|
|
| remote system |
|
| &I2 | XON/XOFF signals to your modem only |
&Kn | Enables/disables data compression. | ||
|
| &K0 | Data compression disabled |
| * | &K1 | Auto enable/disable |
|
| &K2 | Data compression enabled |
|
| &K3 | MNP5 compression disabled |
&Mn | Sets Error Control (ARQ) for connections at 1200 bps | ||
| and higher. | ||
|
| &M0 | Normal mode, error control disabled |
|
| &M1 | Reserved |
|
| &M2 | Reserved |
|
| &M3 | Reserved |
| * &M4 | Normal/ARQ | |
|
| &M5 | ARQ mode |
Page 12
