ETL-ES-Lafayette-WH09

Safety tips

OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY, MOUNT TO OUTLET BOX MARKED "ACCEPTABLE FOR FAN SUPPORT",

AND USE THE OUTLET SCREWS PROVIDED WITH THE OUTLET BOX. MOST OUTLET BOXES COMMONLY USED FOR THE SUPPORT OF LIGHTING FIXTURES

ARE NOT ACCEPTABLE FOR FAN SUPPORT AND MAY NEED TO BE REPLACED. CONSULT A QUALIFIED ELECTRICIAN IF IN DOUBT.

1.Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards (ANSI/NFPA 70-1996), including fire-rated construction.

2.Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer.

3.After making the wire connections, gently push connections into outlet box with wire nuts pointing up. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box and ungrounded conductor on the other side of the outlet box.

4.Before you begin installing the fan, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

5.Be cautious! Read all instructions and safety information before installing your new fan. Review the accompanying assembly diagrams.

6.When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

7.Make sure the installation site you choose allows the fan blades to rotate without any obstructions. Allow a minimum clearance of 7 feet from the floor to the trailing edge of the blade.

8.To reduce the risk of fire, electric shock, or personal injury, this fan must be mounted to an outlet box marked suitable for fan support. And use mounting screws provided with the outlet box. (Mounting must support at least 35 lbs.)

9.Do not bend blade holders during installation to motor, balancing or during cleaning. Do not insert foreign object between rotating blades.

10.Attach the mounting bracket using only the hardware supplied with the outlet box. Fan is only to be mounted to an outlet box marked “Acceptable for Fan Support”.

11.To reduce the risk of fire or electric shock, do not use this fan with any solid state fan speed control device, or variable speed control.

12.If this unit is to be installed over a tub or shower, it must be marked as appropriate for the application.

13.NEVER place a switch where it can be reached from a tub or shower.

14.The combustion airflow needed for safe operation of fuel-burning equipment may be affected by this unit’s operation. Follow the heating equipment manufacturer’s guideline safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) and the local code authorities.

15.Before servicing or cleaning unit, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

NOTE: FOR OUTDOOR FANS ONLY: Suitable for use in wet locations when installed in a GFCI protected branch circuit.

 

TOOLS REQUIRED

 

 

Phillips Screwdriver

Wire Cutters

Pliers

Step Ladder

2

Page 1 Page 3
Page 2
Image 2
Westinghouse ETL-ES-Lafayette-WH09 owner manual Safety tips
Page 1 Page 3

ETL-ES-Lafayette-WH09 specifications

The Westinghouse ETL-ES-Lafayette-WH09 is a modern electric kettle that stands out due to its combination of functionality, safety features, and sleek design. Known for its capacity to boil water quickly and efficiently, this kettle incorporates advanced technologies that enhance user experience while ensuring reliability and durability.

One of the main features of the ETL-ES-Lafayette-WH09 is its powerful heating element that enables rapid boiling. With a wattage of around 1500 watts, it can bring water to a boil in minutes, making it ideal for those who lead busy lives and need hot water for tea, coffee, or instant meals. The kettle typically has a capacity of 1.7 liters, providing enough water for several servings, which is perfect for both personal use and entertaining guests.

Safety is a top priority in the design of the ETL-ES-Lafayette-WH09. It is equipped with automatic shut-off technology that activates once the water reaches its boiling point, preventing overheating and ensuring peace of mind. Additionally, the kettle features a boil-dry protection mechanism that shuts off the kettle if it is accidentally turned on without water, averting potential hazards.

Another significant characteristic of the Westinghouse kettle is its ergonomic design. The kettle often comes with a cool-touch handle, which ensures a comfortable grip while pouring hot water. The spout is designed for precision pouring, minimizing the risk of spills and splashes. Moreover, the kettle features a 360-degree swivel base, allowing for effortless placement and removal from the kettle base, making it convenient for left- and right-handed users alike.

In terms of aesthetics, the Westinghouse ETL-ES-Lafayette-WH09 often boasts a contemporary look, with a polished stainless steel body that not only ensures longevity but also adds a touch of elegance to any kitchen countertop. The clear water level indicator allows users to see the water level at a glance, promoting efficiency and convenience during use.

The kettle also typically features a removable and washable filter that helps to prevent limestone buildup from hard water, ensuring the purity of boiled water. Coupled with its attractive design and essential features, the ETL-ES-Lafayette-WH09 is a reliable choice for anyone looking to enhance their kitchen experience with a high-quality electric kettle.
Top Page Image Contents