Westinghouse L2046NV manual Installation, Attaching the Base Stand to the LCD Monitor

Installation

1. Attaching the Base Stand to the LCD Monitor

Attach the base stand to the LCD monitor stand neck by aligning the holes and tabs. Press in and snap the base into place. To remove the base stand, press the tabs on the bottom of the stand neck and remove the base.

2.Connect Video Cables to a Computer

Connect one of the following into the back of the LCD Monitor:

IMPORTANT: Before beginning, make sure the monitor and computer are turned off.

DVI-D CONNECTION: Connect a Digital DVI cable from your computer to the LCD Monitor DVI-D port.

VGA CONNECTION: Connect an analog VGA cable from your computer VGA OUT port to the LCD Monitor D-SUB port.

9