OSD Menu Functions
All the function settings for the LCD monitor are controlled via the control keys located on the side of the monitor. To display the OSD main menu, press the “Menu” keypad button on the control panel. (Note: The OSD menu display will disappear automatically after approximately 10 seconds, if no action is taken.)
The LCD monitor has been adjusted to optimal settings before shipment. Adjustments to the monitor settings can be made using the OSD menu.
ξ Press the “Menu” 
button to display the OSD.
ξ Press the Turbo/ or Auto/ button to scroll through the
ξ Press the 
/X button to enter the
ξ Press the Turbo/ or Auto/ button to select the function to be adjusted.
ξ Press the 
/W or 
/X buttons to change the current setting of the 
button. Changes are saved
automatically.
ξ To exit the OSD menu press "Menu" 
again. It automatically will save any changes that have been made.
Source
Image Menu
Color Temp. Menu
Miscellaneous Menu
Information Menu
Resolution & Frequency
NOTES:
ξ Any changes are automatically saved in memory when the OSD turns off. Turning off the power should be avoided while using the OSD menu.
ξ Adjustments for clock, phase, and positions are saved for each individual signal timing. Except for these adjustments, all other adjustments have only one setting, which applies to all signal timings.
ξ The icon color will change from gray to blue when a
11
