OSD Menu Functions
All the function settings for this LCD monitor are controlled via the control keys located on the side of the monitor.
To display the OSD main menu, press the 
keypad button on the control panel. (Note: The OSD menu display will disappear automatically after approximately 10 seconds, if no action is taken.)
This LCD monitor has been adjusted to optimal settings before shipment. If needed, adjustments to the monitor settings can also be made using the OSD menu.
•Press the 
button to display the OSD.
•Press the▲ or▼ button to scroll through the
•Press the X button to enter the
•Press the▲or▼ button to select the function to be adjusted.
•Press the W orXbuttons to change the current setting of the
•To go back to the previous menu, press the 
button. Changes are saved automatically.
•To exit the OSD menu press 
again. It automatically will save any changes that have been made.
(Example)
Image Menu
Audio Menu
Color Menu
Miscellaneous Menu
Info Menu
Source
Resolution & Frequency
Extra functions:
•DDC/CI: Allows the monitor to communicate with PC graphic card under Microsoft Windows Vista.
•DCR: To turn on or off Dynamic Contract Ratio.
•Language: Select OSD languages in between different languages.
•Auto Setting: Set to automatically perform
•CM Engine: Start with Color Management Engine.
•Optimal aspect ratio: ideal fit your display to the viewable area of the monitor.
•Reset: Restore this LCD monitor to its factory default settings.
NOTES:
•Any changes are automatically saved in memory when the OSD turns off. Turning off the power should be avoided while using the OSD menu.
•Adjustments for clock, phase, and positions are saved for each individual signal timing. Except for these adjustments, all other adjustments have only one setting, which applies to all signal timings.
•The icon color will change from gray to blue when a
8
