![](/images/new-backgrounds/1202417/20241711x1.webp)
Safety Guidelines
Warning: This device must be operated with the original power supply, part number
CAUTION: The power supply outlet should be located near the equipment and should be easily accessible. Use a power cable that is properly grounded. Always use the appropriate AC cord that is certified for the individual country. Some examples are listed below:
USA | UL | Switzerland | SEV |
Canada | CSA | Britain | BASE/BS |
Germany | VDE | Japan | Electric Appliance Control Act |
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
The power cord set for this unit has been enclosed and has been selected according to the country of destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to replace the original cord, or if it is not enclosed.
The female receptacle of the power cord must meet
Figure A1 | Figure A2 |
For the United States and Canada
In the United States and Canada the male end of the plug is a
Cord Type | Size of Conductors in Cord | Maximum Current Rating of Unit |
SJT | 18 AWG | 10 Amps |
| 16 AWG | 12 Amps |
| 14 AWG | 12 Amps |
SVT | 18 AWG | 10 Amps |
| 17 AWG | 12 Amps |
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and may cause harmful interference to radio communications if not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced technician for help.
FCC Warning:
To assure continued FCC compliance, the user must use a grounded power supply cord and the provided shielded cables. Any unauthorized changes or modifications not expressly approved by Westinghouse Digital could void the user's authority to operate this device.
5