Westinghouse LD-2680 manual Standard, Fill, Overscan, Mode

English

SETUP MENUS

VIEW MODE

Use the View Mode sub-menu to select the aspect ratio of the display.

Press on the remote control or MENU on the control panel to display the setup menu screen then select View Mode to display the View Mode sub-menu. The following options are available: Standard, Fill, Overscan, and 1:1 Mode.

View Mode

1:1 Mode Standard Fill Overscan

Standard

Picture is displayed in its original size.

Fill

Picture is displayed to cover the entire screen.

Overscan

Picture is scaled down to fit the display area.

1:1 Mode

Matches the incoming resolution exactly to the pixels without any scaling.

Adjusting View Mode

1Press the / keys on the remote control to select the desired option.

2Press or to save and exit the screen.

VIEW MODE (VGA)

Select VGA as your input source and use the View Mode sub-menu to adjust the display in VGA mode.

Press on the remote control or MENU on the control panel to display the setup menu screen then select View Mode to display the View Mode sub-menu. The following options are available: Aspect Ratio, H. Position, V. Position, Fine Tune, and Auto Sync.

40