Troubleshooting

No power

Make sure AC cord is plugged into the back of the LCD TV.

Make sure AC power cord is securely connected to the AC socket.

Plug another electrical device (like a radio) to the power outlet to verify that the outlet is supplying the proper voltage.

Power is ON but no screen image

Adjust brightness and contrast.

Check Source settings.

Wrong or abnormal colors

If any colors (red, green, or blue) are missing, check the video cable to make sure it is securely connected. Loose or broken pins in the cable connector could cause an improper connection.

The red connector for right audio is easily confused with the red Pr connector in YPbPr component video input. Double check that they are correctly attached.

Remove distribution amplifiers from the signal path.

Snow appears on screen

Check your antenna connection.

Remove unnecessary signal splitters to improve signal quality.

Replace poor or worn cables to properly match 75 ohm impedance.

Check TV / CATV selection.

No sound

Check your audio connection.

Press MUTE on the remote control again, so that MUTE disappears from the screen.

Check your audio settings; your TV audio may be set to SAP.

Press the Volkey on your remote control.

Make sure that headphones are not connected.

Remote control does not work

Make sure the batteries are inserted correctly.

Replace old or worn batteries.

Remote control code not found in “universal” remote

Purchase a separate “learning” remote control.

How do I find more help?

www.westinghousedigital.com

Contact customer service at (866) 287-5555 or service@westinghousedigital.com.

© 2006 Westinghouse Digital Electronics, LLC. All rights reserved. Specifications subject to change without notice. Westinghouse and You can be sure... if it’s Westinghouse are trademarks of Westinghouse Electric Corporation and are used under license.

26

Page 27
Image 27
Westinghouse LTV-19w6 user manual Troubleshooting