6-Outlet Yard Stake with Dual Timers
All Weather 6-Outlet Safety Power Station
with Digital Photocell Timer & Programmable 7 Day Digital Timer
NOTE: To set up Timer for the first time, plug in the timer for 10 minutes, then push the “Reset” button to clear all settings.
To Use Digital Timer
Slide Switch To “Timer”
To Set the Current Time | While time appears in the LCD. |
|
|
Push “Set Time” button once. The time display will be flashing. (If the display stops flashing before you finish, just push “Set Time” again to continue.)
Push the “Day” button until the current day appears on top.
Push the “Hour” button until the current hour appears. Be sure to cycle through the hours until AM or PM appears to the right of the time.
Push the “Min” button until the current minute appears. (Holding the “Min” button down will make the minutes advance rapidly.)
Push the “Set Time” button to finish the program – the display will stop flashing. (If it stops flashing before you push the button, that’s okay.)
To Set ProgramSlide Switch To “Timer”- be sure to set the current time first (see left)
Push the “Mode” button once. The words “Program #1 ON” will appear. We will now set the time for your
Push the “Set Time” button once. The time display will be flashing. (If the display stops flashing before you finish, just push “Set Time” again to continue.)
All of the days of the week will appear on top. This means that the On/Off times you set will run every day of the week. To have the program run only on specific days, push the “Day” button to cycle through the different day options. The choices in order are:
MO TU WE TH FR SA SU - all the days of the week | MO – Monday Only | FR – Friday Only |
MO TU WE TH FR SA - Monday through Saturday | TU – Tuesday Only | SA – Saturday Only |
MO TU WE TH FR - Monday through Friday | WE – Wednesday Only | SU – Sunday Only |
SA SU - Saturday and Sunday only | TH – Thursday Only |
|
|
|
|
Push the “Hour” button until the desired ON hour appears. Be sure to cycle through the hours until AM or PM appears to the right of the time.
Push the “Min” button until the desired ON minute appears.
Push the “Set Time” button to finish the program - the display will stop flashing. (If it stops flashing before you push the button, that’s okay.)
Push the “Next Program” button. The words “Program #1 OFF” will appear. Repeat - to set the OFF time.
Push the “Mode” button to finish the program and return to the current time.
You are now finished setting Program #1. To set additional programs, push “Mode” to enter the programming mode and then “Next Program” to reach Program 2, 3, etc. Up to 6 programs can be entered.
NOTE: The digital timer turns On and Off when the current time matches the time you set in the program, and is not retroactive. This means that if the current time is 5pm and you set the timer to turn ON at 4pm, the program will not run until tomorrow at 4pm.
To Use Photo Cell Timer
Slide Switch To “Photo Cell”
Push the “Mode” button once. You will see the words “On At Dusk, OFF 0:00 At Dawn.” This means that the
Push the “Photo Set” button repeatedly to cycle through the different Dusk to Dawn options. You may have your devices turn ON at Dusk, and turn OFF from 1 to 12 hours after dusk.
Push the “Mode” button once to finish program- ming. It is okay if the current time displayed is not correct; the Photocell timer will still work correctly. If desired, you may set the current time by following the instructions to the left.
Manual On/Off
The timer can be manually turned On or Off as desired.
•Push the ON/OFF/AUTO button to change the current mode to On, Off, or Auto (follow the timer settings).
Ni-MH battery included.
10Min Charge retains program for up to 1 months. Full charge retains for more than 2 months.
Contains
Customer Service Assistance: Toll Free
Packaging and Use Instructions
General: An outdoor
CAUTION – Risk of Fire. Not for permanent installation. Use only with a total of 12 Ampere maximum
If using Christmas tree or
Cord sets shall be plugged into a
If using an
After completion of installation, the connector shall be maintained a minimum of 6 inches above ground. For temporary outdoor installation and use - Not to exceed 90 days
15Ft. (4.5m) AWG 12/3 SJTW Rated 125V/15A/1875W/60Hz
Interactive Programming & Operating Tutorial available online at: www.thencc.com
is the registered trademark of The Stanley Works and Subsidiaries. Produced under license by The NCC. Distributed by: The NCC, Inc., Brooklyn, NY 11220 • www.thencc.com • MADE IN CHINA