Getting the Maximum out of it
6.Tap the clock button and set the start time using the Left/Right buttons.
7.Tap one or more day buttons to select or deselect days for the timer.
You can choose to repeat the timer weekly.
8.Scroll down to display the second timer control panel in which you can set the stop time.
9.Enter the command the timer has to execute.
10.Tap the clock button and set the stop time using the Left/Right buttons.
11.Press the Left button to close the timer.
A confirmation screen appears, which allows you to save or cancel the timer.
12.Tap Save.
The timer is activated.
Note:
The timer only works when the remote controller’s sending eye is pointed towards the controlled device and no obstructions interfere the infrared signal.
Editing timers
You can edit any timer you have set.
1.Open the timer group that contains the timer.
2.Switch to Edit mode via the Mode button.
3.Tap the timer you want to edit.
The contents of the timer appear.
4.Edit the timer.
5.Press the Left button to close the timer.
A confirmation screen appears, which allows you to save or cancel the timer.
6.Tap Save.
The timer is edited.
Organizing macros and timers into groups
You can create as macro groups or timer groups up to 25 macros or timers in each group.
1.Open any macro or timer group.
2.Switch to Add mode by using the Mode button.
You can create a new group, copy an existing group, or restore a previous deleted group.
•Create a new group: You add a new group in which you can record new macros.
•Copy an existing group: You copy a group and its macros and use it for new macros.
•Restore a previously deleted group: You restore a deleted group and reuse the macros.
3.Tap Create Timer Group or Create Macro Group.
32
