Getting the Maximum out of it
4. Adding and Moving Devices
Adding devices
If you have a device that is not provided in the Device menu, you can add it to the remote controller.
You cannot add devices to the Home menu directly. You have to add them by using the Device menu.
1.Make sure the device tab is active.
The device tab is active when the name of a device is displayed.
2.Switch to add mode by using the Mode button.
The remote controller displays the following choices:
•Add New Device: Choose this option to add a completely new device.
•Copy Existing Device: Choose this option to copy a device already provided in the Device menu (for example for a second television).
•Restore Deleted Device: Use this option to restore a device you have deleted.
3.Tap the device you want to add in the Device menu.
Note:
If the device you want to add is not provided, choose a similar one. You can customize it later.
The remote controller gives you the possibility to add the device with or without
•Add by
•Don’t add RC codes: If you choose this option, the new device is added without operational buttons. You can program them as described in “Programming control panel buttons” on page 23.
4.Tap the button of your choice.
The new device is automatically displayed in Use mode.
Moving menu items
You can change the order of Device menu items and Macro menu items. Changes you make in the Device menu are automatically updated in the Home menu.
1.Make sure the device tab is active. or
Make sure the macro tab is active.
The device or macro tab is active when the name of a device or macro is displayed.
2.Switch to Move mode by using the Mode button.
The remote controller displays the menu.
3.Tap the menu item of your choice.
The menu item is highlighted.
4.Use the Left and Right button to move the menu item up or down.
5.Tap Accept to save the changes.
You return to Use mode.
27
