570V560V-E3p-28p Page 5 Monday, July 9, 2001 4:30 PM

Setting up Your Monitor

Connecting Your LCD Monitor

➂ ➄

➄

➃

➃

Figure 3. Cable connections

1

2

Turn off your computer and unplug its power cord.

Connect the signal cable to the 15-pin D-sub connector on the back of your monitor.

3

Connect the signal cable to the video port on your computer, video board, video card,

or graphics card.

4

Connect the power cord for your monitor to the DC adapter and connect the adapter

jack to the DC power port on the back of your monitor.

5

Plug the computer and monitor power cords into a nearby power mains outlet.

 

6

Turn your computer and monitor on. If your monitor displays an image, it has been

successfully installed.

7

If necessary, install the video driver for this monitor (see “Installing the Video Driver”

on page 7).

8

After your monitor has been fully installed, run Auto Adjustment (see page 11).

 

English 5