Troubleshooting
The Remote controller will not switch modes
•When the batteries are low the Remote controller prevents you from switching to customizing modes so that no customization can get lost. Replace the batteries or recharge the battery pack (see pages 9, 10).
The Remote controller is low on memory
Recharging Problems
The batteries will not recharge
•Make sure you are using the rechargeable battery pack included with your recharging dock and not the AA batteries.
The indicator light blinks
•The remote controller displays a message to clean up the memory. The Remote controller will do this by permanently removing devices and macro and timer groups you have deleted.
Warning:
Cleaning up memory will take 10 minutes or longer. Never remove batteries during the clean- up process. This might damage the configuration file resulting in loss of your customized commands.
The configuration file is corrupted
•When this very unlikely event occurs, you have to revert to the original configuration. All your customized commands devices and macros will be lost and you will have to reprogram your remote controller.
Remote controller error messages
•If one of the following error messages occurs, please contact your dealer or the Onkyo customer service:
•Can not open configuration file
•Configuration file error
•No configuration file found
•Invalid configuration file version
•Check if the contacts on the recharging dock are clean and free of obstructions.
•Make sure the remote controller lies properly on the dock.
•Make sure the battery pack is installed properly in your remote controller (see page 10).
40
