Fluke DSP-100, DSP-2000 user manual Return Loss, Prop Delay2 Delay Skew2

Tests Run per Test Standard During an Autotest C

Table C-1. Tests Run per Test Standard During an Autotest (continued)

	Test Standard1	Attenuation
Coax Cables
IEEE 10BaseT		■ 5-10 MHz
100BaseTX		■ 16 MHz
100BaseT4		■ 2-12.5 MHz
IEEE 802.12 4-UTP		■ 1-15 MHz
IEEE 802.12 STP		■ 1-100 MHz
TokenRing, 4 Mb/s		■ 4 MHz
TokenRing,16 Mb/s, Passive		■ 16 MHz
TokenRing,16 Mb/s, Active		■ 16 MHz
TP-PMD		■ 16 MHz
Twin-Ax: RJ45 pins 4, 5, S
ARCnet
Aus/NZ Class C Channel		■	1-16 MHz
Aus/NZ Class D Channel		■	1-100 MHz
Aus/NZ Class C Basic Link		■	1-16 MHz
Aus/NZ Class D Basic Link		■	1-100 MHz
All Tests		■ 1-100 MHz

ACR Return Loss

■1-80 MHz

■1-100 MHz

■1-12 MHz

■1-25 MHz

■1-25 MHz

■1-80 MHz

■1-100 MHz

■1-100 MHz

■ 1-100 MHz ■ 1-100 MHz

Prop.

Delay2

■

■

■

❒

Delay Skew2

■

■

❒

❒

❒

❒

❒

1.Test standards version 4.0.

2.Resistance, propagation delay, and delay skew are always measured; results appear on printed test reports.

■Pass/Fail result given.

❒Pass/Warning result given.

Results within the accuracy specifications of the test tool are marked with an asterisk. NEXT test is run but not displayed. Results are used to calculate ACR.

C-5