Getting Started 2
Configuring the Test Tool
Setting the Date and Time
The test tool has a clock that records the date and time for saved test results.
To change the date or time or the format for the date or time, proceed as follows:
1.Turn the rotary switch to SETUP.
2.Press $Page Down three times.
3.Use Dto highlight the date or time parameter you want to change.
4.Press ! Choice. The display you see next depends on which parameter you are changing.
If you are changing the date or time, use $INC or #DEC to increment or decrement the highlighted number. Use LRto move the highlighted area from one number to another number.
If you are changing the date or time format, use DUto highlight the format you want.
5.Press Eto accept the highlighted date, time, or format.
