DSP-100/2000
Users Manual
Downloading New Software
When a software update becomes available from Fluke, you can download the software from Fluke’s LAN Products BBS or web site to your PC, then use DSP- LINK to download the software to your test tool.
WCautions
Downloading new software overwrites the existing test software in your test tool. You will not have access to the old version of the software.
Downloading new software erases all data stored in the test tool’s memory. To save stored Autotest or Single Test results, use
To prevent an unexpected loss of battery power to the test tool, connect the battery charger to the test tool during the downloading process.
To download new software from the BBS or web site to your test tool, proceed as follows:
1.Copy the software update file from the BBS or web site to a PC. The file is compressed and
2.Execute the file to expand the data. Expanding the file creates files with the extensions .SDB or .DSP. More than one file may be created.
3.Connect the test tool to the PC and configure the serial ports as described in the earlier section “Preparing for Data Transfer.”
4.In the
5.If you want to save the Autotest reports stored in memory, click on no in response to the next dialog box. Save the reports by uploading them to the PC.
If you do not want to save the stored reports, click on yes.
6.Enter the path and file name of the expanded software update file (.DSP or
.SDB).
7.Click on OK.
8.Repeat steps 4 through 6 for all files created by the expansion process.
