Getting Started 2
Rotary Switch
Setup
Allows you to do the following:
∙Select a test standard and cable type.
∙Select an average cable temperature when temperature is required by the selected test standard.
∙Set the test tool to test cable installed in conduit when a conduit setting is required by the selected test standard.
∙Enable remote testing or automatic remote detection when you use a second main unit or a smart remote as a remote unit.
∙Set the cable identification number to increment automatically each time you save Autotest results.
∙Set the backlight timer to turn off the backlight after a specified period of inactivity.
∙Set the
∙Set the fault threshold for the impulse noise test.
∙Select interface parameters for the serial port.
∙Enable or disable the test tool’s beeper.
∙Set the date and time.
∙Select a format for the date and time.
∙Select a unit for length measurements.
∙Select a format for displaying decimal fractions.
∙Select a language for the display and printed reports.
∙Select a frequency for the power line noise filter.
∙Enable or disable the shield continuity test.
∙Modify test standards for custom cable configurations.
∙Select 100 MHz or 155 MHz as the maximum frequency for NEXT, ACR, and attenuation tests.
