Fluke DSP-2000, DSP-100 user manual Change #3

DSP-100,DSP-2000 Users Manual Supplement

On page 7-25, replace the wire map display at the top of the first column with the following:

gc51i.eps

Wire map display showing a short between pins 1 and 2.

Change #3

On page 6-1, under Calibrating the Test Tool add the following note:

Note

The test tool requires a traceable calibration once a year to make sure that it meets or exceeds the published accuracy specifications. Send it to an authorized Fluke service center for a complete traceable calibration once a year.

On page 8-7, change Service Center Calibration Period,

To: Traceable Calibration Period

Change #4

On page 8-2, under Replacing the NiCad Battery Pack, add the following note:

Note

Do not use a NiMH battery pack in place of the NiCad battey pack. The test tool will not charge properly with a NiMH battery pack.

7/00 5