Fluke DSP-2000 user manual DSP-100/2000

DSP-100/2000

Users Manual

∙Produces 2-way Autotest results in approximately 20 seconds.

∙Includes a stored library of common test standards and cable types.

∙Allows for configuration of up to 4 custom test standards.

∙Time Domain Crosstalk (TDX™) analyzer locates the position of crosstalk (NEXT) problems on a cable.

∙Tests for return loss (RL).

∙Produces plots of NEXT, attenuation, ACR, and RL. Shows NEXT, ACR, and attenuation results up to 155 MHz.

∙Stores at least 500 cable test results in nonvolatile memory.

∙Monitors impulse noise and network traffic on Ethernet systems. Hub port locator helps you identify port connections.

∙Sends stored test reports to a host computer or directly to a serial printer.

∙Flash EPROM accepts test standard and software upgrades.

∙Tests fiber optic cable when used with a Fluke DSP Fiber Optic Meter. Model DSP-2000 includes the following additional features:

∙Monitors 100BaseTX network traffic.

∙Diagnostic routine provides specific information about the location and cause of an Autotest failure.

∙Tests for remote return loss (RL@REMOTE) and power sum NEXT (PSNEXT).

∙Determines which standards are supported by a hub port connection.

∙Tone generator lets you use an inductive pickup device to identify cables in a LAN installation.

1-2