Getting Started 2
Remote Features
Table 2-5. Remote Connectors and Features
Item
1
2
3
4
5
6
7
8
9
Feature
AC adapter/ charger jack
AC power indicator
RJ45 connector
Pass LED
Test LED
Fail LED
Rotary switch
Description
A DB9P connector for loading software updates.
Connection for the ac adapter/charger supplied with the test tool.
LED Style 1: A green LED that turns on when the test tool is powered with the ac adapter/charger.
LED Style 2: A multicolor LED with four states:
Off: AC adapter/charger is not connected, or is connected without the battery pack installed.
Blinking Red: The ac adapter/charger is trickle charging the battery in preparation for fast charging. This mode indicates an extremely low battery voltage. The test tool may not operate.
Steady Red: The ac adapter/charger is fast charging the battery.
Steady Green: Fast charging is complete. The ac adapter/charger continues to trickle charge the battery.
A shielded
A green LED that turns on at the end of a test if no faults were detected.
A yellow LED that turns on when a test is in progress.
A red LED that turns on at the end of a test if one or more faults were detected.
A LED that turns on when the smart remote battery voltage is low.
On/off switch for smart remote.
