DSP-100/2000
Users Manual
Selecting a Length Unit
The test tool displays length measurements in meters or feet.
To change the unit of measurement, proceed as follows:
1.Turn the rotary switch to SETUP.
2.Press $Page Down four times.
3.Press ! Choice.
4.Use DUto highlight the desired unit.
5.Press Eto accept the highlighted unit.
Selecting a Numeric Format
The test tool displays decimal fractions with a decimal point separator (0.00) or a comma separator (0,00).
To change the numeric format, proceed as follows:
1.Turn the rotary switch to SETUP.
2.Press $Page Down four times.
3.Use Dto highlight the numeric format.
4.Press ! Choice.
5.Use DUto highlight the desired format.
6.Press Eto accept the highlighted format.