DSP-100/2000
Users Manual
The following tests apply to coaxial cable:
∙Impedance: Measures the impedance of the cable.
∙Resistance: Measures the loop resistance of the cable, shield, and terminator.
∙Length: Measures the length of unterminated cables.
∙Anomaly Detection: During a coaxial cable test, the test tool also detects and reports the position of the largest impedance anomaly (if any are present) on the cable.
Single Test
The SINGLE TEST mode provides access to the individual tests defined by the selected test standard, except for the ACR test. This mode also allows execution of TDR and TDX™ analyzer tests. A scanning function, which continuously repeats the test, is available for the wire map, resistance, TDR, and TDX analyzer tests.
Monitor
The MONITOR mode allows you to continuously monitor impulse noise on network cables or network activity on Ethernet systems. Network activity is monitored for collisions, jabber, and percentage of system utilization.
The MONITOR mode also includes a hub port locator, which helps you determine port connections at a hub. Model
