JVC DR-M7S To make the disc for On-Disc Timer Programming, Prog/Check, A Load a disc, rtwe

Filename [DR-M7EK_08Recording.fm]
DR-M7EK_01.book Page 60 Friday, April 2, 2004 11:21 AM	Masterpage:Left+

60 TIMER RECORDING (cont.)

On-Disc Timer

Programming

On-Disc Timer Programming is a function used with discs that are especially intended for a specific programme. The disc is then programmed for a programme you always watch every day or every week. Since older programs are automatically overwritten, a single DVD-RAM/RW (VR mode) disc can be used without worrying about how much recording capacity remains. ( pg. 62, “How discs are overwritten”)

You can programme each disc to timer-record as many as

8programmes.

Before performing On-Disc Timer Programming:

●Turn on the unit.

●Turn on the TV and select the AV mode.

●Slide the TV/CABLE/SAT/DVD switch to DVD.

●Make sure that the unit’s built-in clock is set properly.

To make the disc for On-Disc Timer Programming

A Load a disc.

APress x to open the disc tray.

BPlace a recordable disc on the disc tray.

● For details, refer to “Placing a Disc” ( pg. 10).

C Press x to close the disc tray.

B Access Programme Check screen.

Press PROG/CHECK.

C Access the programme screen.

When On-Disc Timer Programming is made for the first time on the disc

Press rt repeatedly to select “DISC TIMER PRGM”, then press ENTER.

●When some programmes are recorded on the disc, a caution message appears. In such a case, backup the programmes as

required, then format the disc before making On-Disc Timer Programming. ( pg. 104, “Format A Disc”)

ATTENTION:

●On-Disc Timer Programming is possible only with the disc for On-Disc Timer Programming.

●If data is recorded on a disc for On-Disc Timer Programming using a unit from another manufacturer, On- Disc Timer Programming may no longer function properly.

		CABLE/SAT		CABLE/SAT
		TV	DVD	TV	DVD
		STANDBY/ON
TV	TV AV TV/CBL/SAT DVD
	VIDEO			DVD1
	ABC	DEF	TV%
GHI	JKL	MNO
PQRS	TUV	WXYZ	PR

CANCEL AUX MEMO/MARK

PROG/CHECK	SHOW VIEW/	PROG/CHECK SAT#	TIMER
	VIDEO Plus+

TOP MENU		NAVIGATION	rtwe
	ENTER		ENTER
MENU		RETURN
PREVIOUS		NEXT
SLOW	PLAY/SELECT	SLOW
REC	STOP/CLEAR	PAUSE
REC MODE LIVE CHECK
SET UP		OPEN/
	DISPLAY ON SCREEN CLOSE

x

When On-Disc Timer Programming has already been made on the disc

Press rt repeatedly to select “NEW TIMER PROGRAMME”, then press ENTER.

D Enter the recording date.

Press rt repeatedly to set the desired date.

●The current date appears on the TV screen. The date you enter appears in its place.

E Enter the recording start time.

Press w e to select “START”, then press rt repeatedly to set the desired start time.

●Each press of rt advances/goes back the start time in 1-min. increments.

●To advance/go back the start time in 30-min. increments, press and hold rt.

AUDIO SUBTITLE ANGLE	PROGRESSIVE
	SCAN

Page 60

April 2, 2004 11:21 am