JVC DR-M7S manual Enter the time, Simulated Surround Effect, Time Search, Access Play Set Up Menu

Filename [DR-M7EK_07Playback.fm]
DR-M7EK_01.book Page 46 Friday, April 2, 2004 11:21 AM	Masterpage:Left+

46		PLAYBACK OPERATIONS (cont.)
Time Search	Simulated Surround Effect

You can play back a disc from the desired point by specifying the elapsed playing time from the beginning of a title (DVD-RAM, DVD-R, DVD-RW and DVD VIDEO) or a disc (Video CD/SVCD and Audio CD).

1Access Play Set Up Menu.

Press ON SCREEN twice.

2Select the menu item.

Press w e to select “”, then press ENTER.

●The pop-up window appears under the selected item.

It is possible to get a simulated surround effect from your stereo system. You can enjoy the virtual surround sound with your 2-channel stereo system.

1Access Play Set Up Menu.

Press ON SCREEN twice.

2Select the menu item.

Press w e to select “ ”, then press ENTER.

●Above the selected item, “3D-ON” appears and Simulated Surround Effect is activated.

●Each time you press ENTER, “3D-ON” appears and disappears alternately.

3Enter the time.

Use number keys (1–9, 0) to enter the time, then press

ENTER.

●Playback starts from the specified time.

Example:

To play back from a point 12 (minutes): 50 (seconds) elapsed.

Press 1	Press 2
Press 5	Press 0

To cancel the simulated surround effect

Press ENTER to clear “3D-ON” from the screen.

NOTES:

●The simulated surround effect works correctly only when playing back a title recorded in multichannels.

●Simulated Surround Effect does not affect the DVD VIDEO bitstream signal from the “DIGITAL AUDIO OUT” connector.

●When Simulated Surround Effect is activated, the settings of

“ANALOG AUDIO OUT” and “D. RANGE CONTROL” are disabled. ( pg. 91)

If you have specified a wrong selection,

Press & (for the last entered number) or 8 (for whole numbers) to clear the wrong number, then enter the correct one(s) before you press ENTER in this step.

To clear Play Set Up Menu

Press ON SCREEN.

NOTES:

●When “X” is displayed on the TV screen in step 3, you have selected a point that excesses the recording time of the disc.

●Some DVD VIDEO discs do not contain time information, and it is not possible to use the Time Search function. In such cases, “X” is displayed on the TV screen as well.

●This function is not possible for a Video CD/SVCD with PBC function.

Page 46

April 2, 2004 11:21 am