JVC DR-M7S manual After Auto Set Up is completed, perform Monitor Set on, MasterpageLeft+

Filename [DR-M7EK_06Name.fm]

DR-M7EK_01.book Page 22 Friday, April 2, 2004 11:21 AM

22

Masterpage:Left+

INITIAL SETTINGS (cont.)

ATTENTION:

Once you have performed Auto Set Up, even if the unit’s memory backup has expired, all the stored stations and their Guide Program numbers remain in the unit’s memory and the unit will not perform Auto Set Up again. The unit only performs Auto Clock Set when the unit is turned on.

If you have moved to a different area, perform each setting as required.

●Tuner setting ( pg. 96)

●Clock setting ( pg. 102)

If a new station starts broadcasting in your area, perform tuner setting. ( pg. 96, “Tuner Set”)

NOTES:

●In areas where no TV station transmits a PDC (Programme Delivery Control) signal, the unit can perform neither Auto Clock Set nor Auto Guide Program Number Set.

●If there is a power cut, or if you press 1 or SET UP while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to turn off the unit power once and try again from step A.

●Auto Clock Set may not function properly depending on the reception condition.

After “Auto Set Up” is completed, perform “Monitor Set” on page 25.

Page 22

April 2, 2004 11:21 am