JVC DR-M7S Digital Audio Dubbing, B Place a disc and load an MD, C Prepare the unit for dubbing

Filename [DR-M7EK_10Editing.fm]
DR-M7EK_01.book Page 84 Friday, April 2, 2004 11:21 AM	Masterpage:Left+

84 EDITING (cont.)

Digital Audio Dubbing

●Turn on the TV and select the AV mode.

●Slide the TV/CABLE/SAT/DVD switch to DVD.

Recorder

You can dub selected audio from a DVD or Audio CD disc to a digital audio device.

However, it is not possible to dub copy-protected discs.

Example: Dubbing to an MD

A Make connections.

Connect the unit and a digital audio device using either an optional optical cable or an optional coaxial cable.

B Place a disc and load an MD.

For the unit

APress x to open the disc tray. B Place a disc on the disc tray. C Press x to close the disc tray.

For the digital audio device

Load an MD.

Optical cable (not provided)

Player

Digital audio device

(MD deck, etc.)

Coaxial cable (not provided)

DIGITAL OUT (COAXIAL)

C Prepare the unit for dubbing.

ASelect the audio to be dubbed.

BStart playback slightly before the actual point from

where you wish to start dubbing.

CPress 9 to pause playback.

D Prepare the digital audio device for dubbing.

Select the input mode.

E Start dubbing.

APress 4 to start playback on the unit.

BStart recording on the digital audio device.

Rear of unit

DIGITAL OUT (OPTICAL)

Note for connection: Remove the protection cap from the cable.

F Stop dubbing.

Stop recording on the digital audio device. Then press 8 to stop playback on the unit.

NOTE:

There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts.

Page 84

April 2, 2004 11:21 am