JVC DR-M7S manual Scan Mode Set, Tray Lock, 106, Set the scan mode, Lock the disc tray

Filename [DR-M7EK_11Subsidiary.fm]
DR-M7EK_11Subsidiary.fm Page 106 Monday, April 5, 2004 9:51 AM	Masterpage:Left+

106 SUBSIDIARY SETTINGS (cont.)

Scan Mode Set

You can select the scan mode from two modes: Interlaced scan mode which is used in the conventional TV system, and Progressive scan mode which enables reproduction of higher-quality images. For details, refer to “GLOSSARY” (
pg. 111).

Tray Lock

You can lock the disc tray to prohibit the unwanted disc ejection by children.

●Turn off the unit.

●Turn on the unit.

●Turn on the TV and select the AV mode.

●Slide the TV/CABLE/SAT/DVD switch to DVD.

ATTENTION:

Your TV needs to be compatible with PAL Progressive.

A Set the scan mode.

Press PROGRESSIVE SCAN for 3 or more seconds.

●Video output indicator () lights on the front display panel if Progressive scan mode has been established. (
pg. 14)

●Each press of PROGRESSIVE SCAN for 3 or more seconds switches the scan mode.

NOTES:

●When the progressive mode is set, be sure to set “L-1 OUTPUT” to “COMPONENT”. (
pg. 82, “L-1 Output and L-1 Input Setting (L-1 OUTPUT and L-1 INPUT)”) Progressive scan is output only from COMPONENT VIDEO OUT connector.

●Interlaced scan mode is the setting at your purchase.

●When Progressive scan mode is engaged, no video signal is output from S-VIDEO OUT connector and L-1 IN/OUT connector.

●Interlaced scan mode might be suitable depending on video material.

●Scan mode cannot be set while menu screen is displayed.

A Lock the disc tray.

While the unit is turned off, press and hold 8, then press x on the unit. “LOCK” appears on the front display panel.

●If you try to eject the discs, “LOCK” appears and indicates that tray is locked.

To unlock tray

While the unit is turned off, press and hold 8, then press x on the unit. “UNLOCK” appears on the display panel.

Page 106

April 5, 2004 9:51 am