JVC DR-M7S manual Delete a Channel, Change Station Channel Position

Filename [DR-M7EK_11Subsidiary.fm]
DR-M7EK_01.book Page 98 Friday, April 2, 2004 11:21 AM	Masterpage:Left+

98 SUBSIDIARY SETTINGS (cont.)

D Select the band.

APress rt to select “BAND”, then press

ENTER.

BPress rt to change the band between CH (regular) and CC (cable), then press ENTER.

Delete A Channel

Perform steps A and B of “Manual Channel Set” on page 97 to access the Confirmation screen before continuing.

A Select the item.

Press rt w e to select the item you want to delete.

E Enter the channel.

APress rt to select “CH”, then press ENTER.

BPress rt to input the channel number you want to

store.

●To enter the registered station name ( pg. 100, “TV Station And ID List”), press rt to select “ID”, then press ENTER. Press rt.

●For fine tuning adjustment, press rt to select “FINE”, then press ENTER. Press rt to perform fine-tuning.

●When “L-2 SELECT” is set to “VIDEO”, “S-VIDEO”, “SAT

VIDEO” or “SAT S-VIDEO”, the “DECODER” setting cannot be changed. ( pg. 83, “L-2 Select Setting (L-2 SELECT)”)

F Enter new channel information.

Press ENTER. The Confirmation screen appears.

●Repeat steps C – F as necessary.

G Close the Confirmation screen.

Press SET UP.

●To change positions, see “Change Station Channel Position” (in the right column).

●If you wish to set station names other than the ones registered in your unit, see “Set Stations (B)” ( pg. 99).

ATTENTION:

Guide Program numbers are not set when channels are stored manually. ( pg. 95, “VIDEO Plus+® System Setup”)

B Delete a channel.

Press &.

●The item next to the cancelled one moves up one line.

●Repeat steps A and B as necessary.

C Close the Confirmation screen.

Press SET UP.

Change Station Channel Position

Perform steps A and B of “Manual Channel Set” on page 97 to access the Confirmation screen before continuing.

A Select the item.

Press rt w e to select the item you want to move, then press ENTER.

B Select the new position.

Press rt w e to select the new channel position, then press ENTER.

Example: If you moved the station in position 4 to position 2, the stations originally in positions 2 and 3 each move down one space.

●Repeat steps A and B as necessary.

C Close the Confirmation screen.

Press SET UP twice.

Page 98

April 2, 2004 11:21 am