JVC DR-M7S Slow Motion, Skip Search, High-Speed Search, Resume Function, Pause during playback

Filename [DR-M7EK_07Playback.fm]
DR-M7EK_07Playback.fm Page 33 Monday, April 5, 2004 9:48 AM	Masterpage:Right-No-Heading

33

High-Speed Search Resume Function

During playback, press 5 for forward high-speed search, or 3 for reverse high-speed search.

●Each press of the button increases the search speed for each direction.

●To resume normal playback, press 4.

OR

During playback, press and hold 6 for 2 or more seconds for forward high-speed search, or press and hold 2 for 2 or more seconds for reverse high-speed search.

●Releasing the button resumes normal playback.

Still Picture/Frame-By-Frame Playback

1Pause during playback.

Press 9.

2Activate frame-by-frame playback.

Press 9.

●Each press of 9 advances the still picture frame by frame.

OR

Press w e.

●Each press of w e advances/reverses the still picture frame by frame.

●Frame-by-frame playback for reverse direction cannot be performed with Video CD/SVCD discs.

●To resume normal playback, press 4.

Slow Motion

While paused, press SLOW – or SLOW +.

●Each press of SLOW – or SLOW + increases the slow motion speed for each direction (from 1/16 to 1/2 times the normal speed).

●Slow motion for reverse direction cannot be performed with Video CD/SVCD discs.

OR

Press 2 or 6 for 2 or more seconds.

Skip Search

During playback, press .

●Each press initiates an approximately 30-second period of fast- motion playback. Normal playback resumes automatically.

It is possible to memorise the position where you stop playback and resume playback from that position.

●Be sure to set “RESUME” to “ON” or “DISC RESUME”. ( pg. 94)

1Memorize a resume point.

Press 8 during playback.

●The unit enters Resume Stop mode and memorises the position where you have stopped playback as a resume point. (The inside of the disc status indicator on the front display panel blinks in the Resume Stop mode.)

●The unit retains a memory of the resume points of the last 30

discs played back, even though they have been ejected if “RESUME” is set to “DISC RESUME”. ( pg. 94)

●To clear the resume points:

(The inside of the disc status indicator stops blinking and lights.)

When “RESUME” is set to “ON”:

•Press 1 on the unit or DVD1 on the remote control to turn off the unit.

•Press x to take out the disc.

•Press 8 in stop mode.

•Press TOP MENU to display the top menu, then start playback by selecting an item, etc.

•Press MENU to display the disc menu, then start playback by selecting an item, etc.

When “RESUME” is set to “DISC RESUME”:

•Set “RESUME” to “OFF”. ( pg. 94)

•Press 8 in stop mode.

•Press TOP MENU to display the top menu, then start playback by selecting an item, etc.

•Press MENU to display the disc menu, then start playback by selecting an item, etc.

2Resume playback.

Press 4 in stop mode. The unit starts playback from the resume point.

NOTES:

●“DISC RESUME” setting works on DVD VIDEO, VCD, SVCD and already finalised DVD-R/DVD-RW (video mode) discs. For other types of discs, the function under “ON” setting will be

applied even if “RESUME” is set to “DISC RESUME”. ( pg. 94)

●If you stop the playback of a disc for which an resume point has already been memorized, the memory will be updated with the new resume point.

●After the unit has memorized the resume point for 30 discs, remembering a new resume point will cause the unit to delete the oldest memorized point. Stopping playback of a disc for which a resume point is already stored may change the order in which the points are stored. This may potentially change the order in which points are deleted.

●When the unit memorizes a resume point for a disc, it also remembers audio language, subtitle and angle settings.

●This function may not work for some Video CD or SVCD.

●When “RESUME” is changed to “ON” or “OFF”, resume points of the discs memorized with “RESUME” set to “DISC RESUME” will be cleared.

●Resume points are memorized for each side of a double-sided disc.

Page 33

April 5, 2004 9:47 am