JVC DR-M7S Programme Playback, Random Playback, Select the switching interval of the slide show

Filename [DR-M7EK_07Playback.fm]
DR-M7EK_01.book Page 48 Friday, April 2, 2004 11:21 AM	Masterpage:Left+

48		PLAYBACK OPERATIONS (cont.)
Programme Playback	Random Playback
You can play back up to 30 tracks in the desired order.	You can play back all the tracks on the disc in random order.

While stopped

1Access Play Set Up Menu.

Press ON SCREEN twice.

2Select the menu item.

Press w e to select “PRGM”, then press ENTER.

●The programme table appears under Play Set Up Menu.

3Select the tracks in the desired order.

Use number keys (1–9, 0) to enter the track numbers.

Examples:

●To select track 5, press the number key “5” and ENTER.

●To select track 15, press the number key “1” and “5”.

●To select track 25, press the number key “2” and “5”.

If you have specified a wrong selection

Press &. The last selection is erased.

Or press 8. The whole selection is erased.

4Start playback.

Press 4. Playback starts in the programmed order.

●When all of the programmed tracks have been played back, Programme Playback stops, but the programmed information remains.

●To add tracks to the end of the programme, perform steps 1 through 3.

●During Programme Playback, pressing 6 skips to the next selection of the programme. Pressing 2 returns to the beginning of the current selection.

To clear Play Set Up Menu and the contents of the programme from the screen

Press ON SCREEN.

To cancel Programme Playback

Press w e to select “PRGM”, then press ENTER.

NOTE:

Programme Playback is not possible depending on the type of disc.

While stopped

1Access Play Set Up Menu.

Press ON SCREEN twice.

2Select the menu item.

Press w e to select “RND”, then press ENTER.

●Playback starts in random order.

To clear Play Set Up Menu and the contents of the programme from the screen

Press ON SCREEN.

To cancel Random Playback

Perform steps 1 and 2.

NOTE:

The same track will not be played back more than once during Random Playback.

Select the switching interval of the slide show

You can control the switching interval of the slide show.

1Access Play Set Up Menu.

Press ON SCREEN twice.

2Select the menu item.

Press w e to select “”, then press ENTER.

●The pop-up window appears under the selected item.

3Select the desired option.

Press rt to select the desired option, then press ENTER.

●Each time you press rt, the interval changes as follows:

5 SEC. { 10 SEC. { 15 SEC. { 20 SEC. { 25 SEC. { 30 SEC. { (Back to the beginning)

Page 48

April 2, 2004 11:21 am