JVC DR-M7S Set DAILY/WEEKLY option, Load the disc, To programme another timer, repeat steps B K

Filename [DR-M7EK_08Recording.fm]
DR-M7EK_01.book Page 61 Friday, April 2, 2004 11:21 AM	Masterpage:Right-No-Heading

61

F Enter the recording stop time.

Press w e to select “STOP”, then press rt repeatedly to set the desired stop time.

●Each press of rt advances/goes back the stop time in 1-min. increments.

●To advance/go back the stop time in 30-min. increments, press and hold rt.

G Enter the channel position.

Press w e to select “TV PROG”, then press rt repeatedly to select the desired channel.

H Set “DAILY/WEEKLY” option.

Refer to step E in “VIDEO Plus+® Timer Programming” ( pg. 56).

●It is necessary to set “DAILY/WEEKLY” option for On-Disc Timer Programming. ( pg. 57, “Daily/Weekly Rec Function”)

I Set the other recording options as required.

Refer to step E in “VIDEO Plus+® Timer Programming” ( pg. 56).

●You can select XP, SP, LP, EP or FR480 mode for “REC MODE”. You cannot select FR (JUST), FR60–FR360 and FR420.

J Access the confirmation screen.

Press ENTER.

K Complete timer programming.

Press ENTER.

●To programme another timer, repeat steps B – K.

To timer-record the programme with the programmed disc

A Load the disc.

APress x to open the disc tray.

BPlace the programmed disc on the disc tray.

● For details, refer to “Placing a Disc” ( pg. 10).

C Press x to close the disc tray.

B Engage the unit’s timer mode.

Press DVD 1. The unit turns off and “ ” appears on the front display panel.

●To disengage the timer mode, press DVD 1 again.

NOTES:

●Even if On-Disc Timer Programming is overlapping with other timer programming, any caution message does not appear. In such a case, recording will be executed in the descending order of the recording start time of the programme.

●On-Disc Timer Programming is not possible on a DVD-RW disc formatted in video mode. ( pg. 104, “Format a DVD-RW disc”)

●The information of a programme recorded with On-Disc Timer Programming is not stored in the library. ( pg. 76)

●The play list is not created for the programmes recorded with On-Disc Timer Programming. ( pg. 72)

●VIDEO Plus+ Timer Programming is not possible on the discs used exclusively for On-Disc Timer Programming.

●Manual Timer Programming is not possible on the On-Disc Timer Programmed disc. ( pg. 58)

●Basic Recording is not possible on the On-Disc Timer Programmed disc. ( pg. 53)

●The On-Disc Timer Programming function does not work on the unit form other manufactures even if the On-Disc Timer Programmed disc is loaded.

●The beginning of a programme may not be recorded. Also, if the 1st programme’s recording stop time and the 2nd programme’s recording start time is the same, the ending of the 1st programme may not be recorded.

●If there is a power cut while recording, the recordings before the power cut are not guaranteed.

Satellite Receiver Users

To timer-record a satellite broadcast using the On-Disc Timer Programming function:

APerform “Satellite Receiver Control Setting” on page 28. B Perform “On-Disc Timer Programming”. In step I, you

cannot set “VPS/PDC” to “ON”.

C Leave the satellite receiver’s power on.

Page 61

April 2, 2004 11:21 am