JVC DR-M7S manual On-Screen Messages, Description

Filename [DR-M7EK_11Subsidiary.fm]
DR-M7EK_01.book Page 109 Friday, April 2, 2004 11:21 AM	Masterpage:Right-No-Heading

	109
ON-SCREEN MESSAGES
MESSAGE	DESCRIPTION
MEMORY IS FULL	The memory is full for registration for the Navigation system. The
NOTHING MORE CAN BE REGISTERED IN THE LIBRARY	recording cannot be started even though the capacity for the
IF YOU DELETE UNNECESSARY TITLE INFORMATION,	recording is enough. ( pg. 71)
YOU CAN THEN REGISTER ADDITIONAL INFORMATION
AVAILABLE MEMORY IS LOW	The remaining capacity of the memory is not enough for
SOON YOU WILL NO LONGER BE ABLE	registration for the Navigation system. The recording cannot be
TO REGISTER INFORMATION IN THE LIBRARY	started even though the capacity for the recording is enough.
IF YOU DELETE UNNECESSARY TITLE INFORMATION,	( pg. 71)
YOU CAN THEN REGISTER ADDITIONAL INFORMATION
DISC NOT REGISTERED IN THE LIBRARY	A disc that is not registered in the library has been inserted.
REGISTER DISC?	Register the disc as necessary. ( pg. 77)
INSERT DISC #XXXX	Appears when a title that has been selected in the library is not
	contained in the loaded disc. ( pg. 76)
CAN NOT RECORD OR MAKE PLAY LIST	● Recording and/or editing cannot be performed with a loaded
DELETE UNWANTED TITLES	DVD-RAM disc.
	● The number of titles exceeds 99.
	● The number of play lists exceeds 999.
SET CLOCK BEFORE TIMER PROGRAMMING	To set the timer programme, the clock must be set in advance.
	( pg. 102)
PROGRAMME FULL	You can programme this unit to timer-record as many as 8
DELETE UNWANTED TIMER PROGRAMME	programmes. To programme more, you need to cancel a timer
	programme already set. ( pg. 63)
CAN NOT SET DISC TIMER PROGRAMMING WITH THIS DISC	On-Disc Timer Programming has been attempted when a disc
PREPARE A FORMATTED DISC AS DESCRIBED BELOW	that is not compatible with the function is loaded. ( pg. 60)
DVD-RAM
DVD-RW (VR MODE)
NO DISC INSERTED	On-Disc Timer Programming has been attempted when a disc is
	not loaded, or loaded upside down. ( pg. 10, 60)
DISC NOT RECORDABLE	When a playback-only disc or a finalised disc is loaded, 7 has
INSERT RECORDABLE DISC	been pressed. ( pg. 7, 105)
PLUSCODE NO. ERROR	An invalid PlusCode number has been input. ( pg. 56)
CONFIRM PLUSCODE NO. THEN RETRY
GUIDE PROGRAMME IS NOT SET	To set the timer programme using the VIDEO Plus+ system, the
SELECT CHANNEL YOU WANT TO RECORD	Guide Program number must be set in advance. ( pg. 95)
CAN NOT SET SHOWVIEW TIMER PROGRAMMING DURING	Appears when you tried to input a PlusCode number during
TIMER RECORDING OR INSTANT TIMER RECORDING	timer recording or instant timer recording.
CANCEL TIMER RECORDING OR
INSTANT TIMER RECORDING, THEN
ENTER THE SHOWVIEW CODE AGAIN
REGION CODE ERROR	A disc loaded cannot be played back on this unit since the
CHECK DISC	region number of the disc does not match that of the unit.
	( pg. 7)
UNREADABLE DISC	When an incompatible disc is loaded, 4 has been pressed.
CHECK DISC	( pg. 7)
COULD NOT FORMAT THE DISC	Formatting is not complete since the disc may be dirty or
CHECK THE DISC	damaged. Take out the disc, clean it and retry. ( pg. 10, 104)
COULD NOT FINALISE THE DISC	Finalising is not complete since the disc may be dirty or
CHECK THE DISC	damaged. Take out the disc, clean it and retry. ( pg. 10, 105)
COULD NOT CANCEL DISC FINALISATION	Cancelling disc finalisation is not complete since the disc may
CHECK THE DISC	be dirty or damaged. Take out the disc, clean it and retry.
	( pg. 10, 105)

Page 109

April 2, 2004 11:21 am